H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 238)

222
c. Expand Advanced Setup to enter the page shown in Figure 210 and set the AP connection
priority to 6.
d. Click Apply.
Figure 210 Configuring AP connection priority
Configuring AC 2
1. Configure AP-related information:
For the detailed configuration, see "Access service configuration."
2. Configure AP connection priority:
Use the default AP connection priority on AC 2.
Verifying the configuration
A higher AP connection priority is configured on AC 1, so AP must establish a connection with AC 1.