H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 36)

20
Web overview
The device provides Web-based configuration interfaces for visual device management and
maintenance.
Figure 14 Web-based network management operating environment
Logging in to the Web interface
You can use the following default settings to log in to the Web interface through HTTP:
• Username—admin
• Password—admin
• IP address of VLAN-interface 1 of the device—192.168.0.100.
To log in to the Web interface of the device from a PC:
1. Connect the Ethernet port of the device to the PC by using a crossover Ethernet cable.
By default, all ports belong to VLAN 1.
2. Configure an IP address for the PC and make sure that the PC and the device can reach each
other.
For example, assign the PC an IP address (for example, 192.168.0.2) within the network segment
192.168.0.0/24 (except for 192.168.0.100).
3. Open the browser and input the login information:
a. Type the IP address http://192.168.0.100 in the address bar and press Enter.
The login page of the Web interface (see
Figure 15 ) appears.
b. Enter the username and password admin, and the verification code, select the language
(English and Chinese are supported at present), and click Login.
Figure 15 Login page of the Web interface