H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 216)

200
AC serves as a DNS client, and uses dynamic domain name resolution and the suffix to access the host
with the domain name host.com and the IP address 3.1.1.1/16.
Figure 186 Network diagram
NOTE:
•
Before performing the following configuration, make sure that the AC and the host are reachable to
each another, and the IP addresses of the interfaces are configured as shown in
Figure 186 .
• This configuration may vary with DNS servers. The following configuration is performed on a PC
running Windows Server 2000.
Configuring the DNS server
1. Create zone com:
a. Select Start > Programs > Administrative Tools > DNS.
b. As shown in Figure 187 , right click Forward Lookup Zones and select New Zone.
c. Follow the instructions to create a new zone named com.
Figure 187 Creating a zone
2. Create a mapping between host name and IP address:
a. In Figure 188 , right click zone com, and then select New Host.