H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 556)

540
Item Description
Radio Displays the selected AP's radio.
SVP Mapping
Select the option before SVP Mapping, and then select an access category for SVP
service:
• AC-VO.
• AC-VI.
• AC-BE.
• AC-BK.
Setting CAC admission policy
1. Select QoS > Wireless QoS from the navigation tree.
By default, the Wireless QoS tab is displayed.
2. Click the icon in the Operation column for the desired AP to enter the page for setting CAC
admission policy, as shown in
Figure 568 .
Figure 568 Setting CAC admission policy
3. Configure the CAC admission policy, as described in Table 181 .
4. Click Apply.
Table 181 Configuration items
Item Description
Client Number
Users-based admission policy, or the maximum number of clients allowed to be
connected. A client is counted only once, even if it is using both AC-VO and AC-VI.
By default, the users-based admission policy applies, with the maximum number of
users being 20.
Channel Utilization
Channel utilization-based admission policy, or the rate of the medium time of the
accepted AC-VO and AC-VI traffic to the valid time during the unit time. The valid
time is the total time during which data is transmitted.
Setting radio EDCA parameters for APs
1. Select QoS > Wireless QoS from the navigation tree.
By default, the Wireless QoS tab is displayed.