H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 233)

217
Table 83 Configuration items
Item Description
AP Connection
Priority
AP connection priority.
Specify the AP connection priority on the AC. For more information, see "
AP connection
priority configuration example ." It can also be used together with the backup function.
For more information, see "Advanced settings."
Broadcast Probe
• Enable—Enable the AP to respond to broadcast probe requests. The AP will respond
to broadcast probe requests with the SSID null.
• Disable—Disable the AP from responding to broadcast probe requests. The AP will
respond to broadcast probe requests with the specified SSID.
By default, this option is enabled.
Configuration File
Specify a name for the configuration file in the storage media and maps the specified
configuration file to the AP.
When local forwarding is enabled, you can use the configuration file to configure the
AP. For example, when you configure a user profile when local forwarding is enabled,
you must write the user profile, QoS policy, and ACL commands to the configuration
file, and download the configuration file to the AP.
IMPORTANT:
The commands in the configuration file must be in their complete form.
Jumbo Frame Size
Set the maximum size of jumbo frames.
When this function is enabled, the AC can send frames whose size does not exceed the
maximum size to the AP.
By default, the AC cannot send jumbo frames to the AP.
AP Echo Interval
Set the interval for sending echo requests.
There is a keep-live mechanism between AP and AC, to confirm whether the tunnel is
working or not. An AP periodically sends echo requests to an AC. The AC responds to
echo requests by sending echo responses, which indicates that the tunnel is up.
Client Alive Time
Set the client keep alive interval.
The keep-alive mechanism is used to detect clients segregated from the system due to
various reasons such as power failure or crash, and disconnect them from the AP.
By default, the client keep-alive functionality is disabled.
Client Free Time Maximum interval for which the link between the AP and a client can be idle.
Backup AC IPv4
Address Set the IPv4 address of the backup AC for
the AP. If you configure the global backup AC
information both in Advanced Setup > AC
Backup and AP > AP Setup, the
configuration in AP > AP Setup takes
precedence. For more information about
AC backup, see "Advanced settings."
Backup AC IPv6
Address Set the IPv6 address of the backup AC for
the AP.
AP CAR
Select this box to configure CAR for the AP.
By default, no CAR is set for an AP.