H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 219)

203
Figure 192 Adding a DNS domain name suffix
Verifying the configuration
Use the ping host command on the AC to verify that the communication between the AC and the host is
normal and that the corresponding destination IP address is 3.1.1.1.
1. Select Diagnostic Tools > Ping from the navigation tree to enter the IPv4 Ping configuration page.
2. Enter host in the Destination IP address or host name field.
3. Click Start to execute the ping command
4. View the result in the Summary field.
Figure 193 Ping operation