H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 290)

274
Figure 276 Network diagram
Configuring the AC
1. Assign an IP address to the AC:
a. Select Network > VLAN to create a VLAN on the AC.
b. Select Device > Interface Management to assign an IP address to the VLAN interface.
2. Configure a RADIUS scheme:
a. Select Authentication > RADIUS from the navigation tree.
b. Click Add.
c. On the page that appears, add two servers in the RADIUS Server Configuration area, and
specify the key expert.
d. Enter mac-auth in the Scheme Name field.
e. Select Extended as the server type.
f. Select Without domain name from the Username Format List.
g. Click Apply.