H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 305)

289
A configuration progress dialog box appears.
e. After the configuration process is complete, click Close.
Figure 302 Binding an AP radio to a wireless service
9. Enable 802.11n(2.4GHz) radio
a. Select Radio > Radio from the navigation tree.
b. Select the box of the target AP.
c. Click Enable.
A configuration progress dialog box appears.
d. After the configuration process is complete, click Close.
Figure 303 Enabling 802.11n(2.4GHz) radio
Configuring the RADIUS server (IMCv3)
NOTE:
The following takes the IMC (IMC PLAT 3.20-R2602 and IMC UAM 3.60-E6102) as an example to
illustrate the basic configuration of the RADIUS server.
1. Add access device.