Table 130, N in, Figure 418 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 406: Table 131
390
Table 130 Configuration items
Item Description
Server Name
Enter a name for the remote portal server.
IP
Enter the IP address of the remote portal server.
Key
Enter the shared key to be used for communication between the device and the remote
portal server.
Port
Enter the port number of the remote portal server.
URL
Specify the URL for HTTP packets redirection, in the format http://ip-address. By default,
the IP address of the portal server is used in the URL.
IMPORTANT:
Redirection URL supports domain name resolution; however, you must configure a
portal-free rule and add the DNS server address into the portal-free address range.
Figure 418 Local portal service configuration
Table 131 Configuration items
Item Description
Server Name
Specify the local portal server name.
IP
Specify the IP address of the local portal server. You need to specify the IP address of
the interface where the local portal server is applied.
URL
Specify the URL for HTTP packets redirection, in the format
http://ip-address/portal/logon.htm or
(depending on the protocol type).
By default, the IP address of the local portal server is used in the URL.
IMPORTANT:
•
To use the local portal server for stateful failover in a wireless environment, you must
specify the redirection URL, and the IP address of the URL must be the virtual IP
address of the VRRP group where the VRRP downlink resides.
•
URL redirection supports domain name resolution, but you need to configure a
portal-free rule and add the DNS server address into the portal-free address range.
Protocol
Specify the protocol to be used for authentication information exchange between the
local portal server and the client. It can be HTTP or HTTPS.