H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 526)

510
• In the second approach, more options are available. In addition, you can change port priority
(local precedence) of a port for priority mapping. This approach is not supported on the
WLAN-ESS interface.
Approach 1
1. Select QoS > Trust Mode from the navigation tree to enter the priority trust mode configuration
page, as shown in Figure 541 .
Figure 541 Configuring priority trust mode
2. Configure the priority trust mode of the interfaces, as described in Table 172 .
3. Click Apply.