H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 261)

245
Item Description
Port Security
See Table 91 .
Parameters such as authentication type and encryption type determine the port
mode. For more information, see Table 99 .
After you select the Cipher Suite option, the following three port security modes are
added:
• mac and psk—MAC-based authentication must be performed on access users
first. If MAC-based authentication succeeds, an access user has to use the
pre-configured PSK to negotiate with the device. Access to the port is allowed
only after the negotiation succeeds.
• psk—An access user must use the pre-shared key (PSK) that is pre-configured to
negotiate with the device. The access to the port is allowed only after the
negotiation succeeds.
• userlogin-secure-ext—Perform MAC-based 802.1X authentication for access
users. In this mode, the port supports multiple 802.1X users.
a. Configure mac and psk
Figure 230 mac and psk port security configuration page
Table 97 Configuration items
Item Description
Port Mode
mac and psk: MAC-based authentication must be performed on access
users first. If MAC-based authentication succeeds, an access user has
to use the pre-configured PSK to negotiate with the device. Access to
the port is allowed only after the negotiation succeeds.
Select Wireless Service > Access Service from the navigation tree, click
MAC Authentication List, and enter the MAC address of the client.
Max User
Control the maximum number of users allowed to access the network
through the port.
MAC Authentication Select MAC Authentication.