H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 569)

553
Figure 582 Setting CAC client number
Verifying the configuration
If the number of existing clients in the high-priority access categories plus the number of clients requesting
for high-priority access categories is smaller than or equal to the user-defined maximum number of users
allowed in high-priority access categories, which is 10 in this example, the request is allowed. Otherwise,
the request is rejected.
Wireless service-based static rate limiting
configuration example
Network requirements
As shown in Figure 583 , two wireless clients access the WLAN through a SSID named service1.
Limit the maximum bandwidth per wireless client to 128 kbps for traffic from the wireless clients to the AP.
Figure 583 Network diagram
Configuring the wireless service
For the configuration procedure, see "Configuring access services."
Configuring static rate limiting
1. Select QoS > Wireless QoS from the navigation tree.
2. Click Client Rate Limit.