Binding an ap radio to a wireless service, Binding an ap radio to a vlan – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 264
248
Figure 232 Enabling a wireless service
2.
Select the wireless service to be bound.
3.
Click Enable.
Binding an AP radio to a wireless service
Binding an AP radio to a wireless service
1.
Select Wireless Service > Access Service from the navigation tree.
2.
Click the
icon corresponding to the target wireless service to enter the page for binding an AP
radio to a wireless service.
Figure 233 Binding an AP radio to a wireless service
3.
Select the AP radio to be bound.
4.
Click Bind.
A configuration progress dialog box appears.
5.
After the configuration process is complete, click Close.
Binding an AP radio to a VLAN
Traffic of different services is identified by SSIDs. Locations are identified by APs. Users at different
locations access different services. For a user roaming between different APs, you can provide services
for the user based on its access AP. The detailed requirements are as follows:
•
Users with the same SSID but accessing through different APs can be assigned to different VLANs
based on their configurations.
•
A roaming user always belongs to the same VLAN.
•
For a user roaming between ACs, if the local AC does not have a VLAN-interface, the user needs
to use an HA in the AC group for forwarding packets to avoid packet loss.