H3C Technologies H3C WX3000E Series Wireless Switches User Manual

H3c wx series access controllers, Web-based configuration guide

Text mode
Original mode

H3C WX Series Access Controllers

Web-Based Configuration Guide

Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com

Software version: WX3000-CMW520-R3308 (WX3024E)

WX5004-CMW520-R2308 (WX5000 series)
WX6103-CMW520-R2308 (WX6000 series)

Document version: 6W106-20120824

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module

Table of contents

Document Outline

Title Page
Preface
- Audience
- Conventions
- About the H3C WX Series documentation set
- Obtaining documentation
- Technical support
- Documentation feedback
Contents
Models of WX series access controllers
Typical network scenarios
- Access controller network scenario
- Access controller module network scenario
- Wireless switch network scenario
Feature matrixes
- Feature matrix for the WX5000 series
- Feature matrix for the WX6000 series
- Feature matrix for the WX3024E
Quick Start
- Quick start wizard home page
- Basic configuration
- Admin configuration
- IP configuration
- Wireless configuration
- RADIUS configuration
- Portal configuration
- Encryption configuration
- AP configuration
- Configuration summary
Web overview
- Logging in to the Web interface
- Logging out of the Web interface
- Introduction to the Web interface
- Web user level
- Introduction to the Web-based NM functions
- Common Web interface elements
- Configuration guidelines
- Troubleshooting Web browser
  - Failure to access the device through the Web interface
Summary
- Device information
- Displaying WLAN service
- Displaying AP
- Displaying clients
License management
- Configuring licenses
- Adding a license
  - Displaying license information
- Configuring enhanced licenses
  - Registering an enhanced license
  - Displaying registered enhanced licenses
Device basic information configuration
- Configuring system name
- Configuring Web idle timeout period
Device maintenance
- Software upgrade
- Rebooting the device
- Generating the diagnostic information file
System time
- Displaying the system time
  - Configuring the system time
  - Configuring the network time
- System time configuration example
- Configuration guidelines
Log management
- Displaying syslog
- Setting the log host
- Setting buffer capacity and refresh interval
Configuration management
- Backing up the configuration
- Restoring the configuration
- Saving the configuration
  - Fast
  - Common
- Initializing the configuration
File management
- Displaying file list
- Downloading a file
- Uploading a file
- Removing a file
- Specifying the main boot file
Interface management
- Interface management overview
- Displaying interface information and statistics
- Creating an interface
- Modifying a Layer 2 interface
- Modifying a Layer 3 interface
- Interface management configuration example
  - Network requirements
  - Configuration procedure
Port mirroring
- Introduction to port mirroring
- Port mirroring configuration task list
  - Adding a mirroring group
  - Configuring ports for a mirroring group
- Configuration examples
- Configuration guidelines
User management
- Creating a user
- Setting the super password
- Switching the user access level to the management level
SNMP configuration
- SNMP overview
- SNMP configuration task list
- Configuring an SNMP view
- Displaying SNMP packet statistics
- SNMP configuration example
Loopback
- Loopback operation
- Configuration guidelines
MAC address configuration
- Overview
- Configuring a MAC address entry
  - Setting the aging time of MAC address entries
- MAC address configuration example
  - Network requirements
  - Configuration procedure
VLAN configuration
- Overview
- Recommended configuration procedure
- Creating a VLAN
- Modifying a VLAN
- Modifying a port
- VLAN configuration examples
- Configuration guidelines
ARP configuration
- Overview
  - Introduction to ARP
  - Introduction to gratuitous ARP
    - Gratuitous ARP packets
    - Learning of gratuitous ARP packets
- Displaying ARP entries
- Creating a static ARP entry
- Removing ARP entries
- Configuring gratuitous ARP
- Static ARP configuration example
  - Network requirements
  - Configuration procedure
ARP attack protection configuration
- ARP detection
- Source MAC address based ARP attack detection
- ARP active acknowledgement
- ARP packet source MAC address consistency check
- Configuring ARP detection
- Configuring other ARP attack protection functions
IGMP snooping configuration
- Overview
- Recommended configuration procedure
- Enabling IGMP snooping globally
- Configuring IGMP snooping on a VLAN
- Configuring IGMP snooping on a port
- Displaying IGMP snooping multicast entry information
- IGMP snooping configuration examples
IPv4 and IPv6 routing configuration
- Overview
- Displaying the IPv4 active route table
- Creating an IPv4 static route
- Displaying the IPv6 active route table
- Creating an IPv6 static route
- IPv4 static route configuration example
- IPv6 static route configuration example
- Configuration guidelines
DHCP overview
- Introduction to DHCP snooping
  - Recording IP-to-MAC mappings of DHCP clients
  - Ensuring DHCP clients to obtain IP addresses from authorized DHCP servers
- Recommended configuration procedure (for DHCP server)
- Enabling DHCP
- Creating a static address pool for the DHCP server
- Creating a dynamic address pool for the DHCP server
- Enabling the DHCP server on an interface
- Displaying information about assigned IP addresses
- Recommended configuration procedure (for DHCP relay agent)
- Enabling DHCP and configuring advanced parameters for the DHCP relay agent
- Creating a DHCP server group
- Enabling the DHCP relay agent on an interface
- Configuring and displaying clients' IP-to-MAC bindings
- Recommended configuration procedure (for DHCP snooping)
- Enabling DHCP snooping
- Configuring DHCP snooping functions on an interface
- Displaying clients' IP-to-MAC bindings
- DHCP server configuration example
  - Network requirements
  - Configuration procedure
- DHCP relay agent configuration example
  - Network requirements
  - Configuration procedure
- DHCP snooping configuration example
  - Network requirements
  - Configuration procedure
DNS configuration
- Overview
- Recommended configuration procedure
- Configuring static name resolution table
- Configuring dynamic domain name resolution
- Configuring DNS proxy
- Adding a DNS server address
- Adding a domain name suffix
- Clearing dynamic DNS cache
- DNS configuration example
Service management
- Overview
- Configuring service management
Diagnostic tools
- Ping
- Trace route
- Ping operation
  - IPv4 ping operation
  - IPv6 ping operation
- Trace route operation
AP configuration
- AC-AP connection
- Auto AP
- AP group
- Configuring an AP
- Configuring auto AP
- Configuring an AP group
- AP connection priority configuration example
Configuring access services
- Access service overview
- Configuring access service
- Wireless service configuration example
- Auto AP configuration example
- 802.11n configuration example
- WPA-PSK authentication configuration example
- Local MAC authentication configuration example
- Remote MAC authentication configuration example
- Remote 802.1X authentication configuration example
- Dynamic WEP encryption-802.1X authentication configuration example
Configuring mesh services
- Mesh overview
- Configuring mesh service
- Normal WLAN mesh configuration example
- Subway WLAN mesh configuration example
  - Network requirements
  - Configuring the AC
- Mesh point-to-multipoint configuration example
- Tri-radio mesh configuration example
- Mesh DFS configuration example
WLAN roaming configuration
- Configuring WLAN roaming
- WLAN roaming configuration examples
- Intra-AC roaming configuration example
- Inter-AC roaming configuration example
Radio configuration
- Radio overview
- WLAN RRM overview
  - Dynamic frequency selection
  - Transmit power control
- Radio setup
- Configuring data transmit rates
  - Configuring 802.11a/802.11b/802.11g rates
  - Configuring 802.11n MCS
    - Introduction to MCS
    - Configuring 802.11n rates
- Configuring channel scanning
- Configuring calibration
- Antenna
- Manual channel adjustment configuration example
- Automatic power adjustment configuration example
- Radio group configuration example
Configuring 802.1X
- 802.1X architecture
- Access control methods
- Configuring 802.1X
Configuring portal authentication
- Introduction to portal authentication
- Configuring portal authentication
- Portal authentication configuration example
Configuring AAA
- AAA overview
- Configuring AAA
- AAA configuration example
  - Network requirements
  - Configuration procedure
Configuring RADIUS
- RADIUS overview
- Configuring a RADIUS scheme
- RADIUS configuration example
- Configuration guidelines
Configuring the local EAP service
- Configuration procedure
- Local EAP service configuration example
Configuring users
- Overview
- Configuring a local user
- Configuring a user group
- Configuring a guest
  - Procedure for a management level administrator to configure a guest
  - Procedure for a guest administrator to configure a guest
- Configuring a user profile
Managing certificates
- PKI overview
- Configuring PKI
- Certificate management configuration example
- Configuration guidelines
WLAN security configuration
- WLAN security overview
- Configuring rogue device detection
- Configuring WIDS
- Configuring the blacklist and white list functions
- Rogue detection configuration example
User isolation
- User isolation overview
  - Before user isolation is enabled
  - After user isolation is enabled
- Configuring user isolation
  - Configuring user isolation
  - Displaying user isolation information
- User isolation configuration example
  - Network requirements
  - Configuration procedure
Authorized IP
- Overview
- Configuring authorized IP
Configuring ACL and QoS
- ACL overview
- QoS overview
  - Traditional packet forwarding services
  - New requirements from new applications
- Configuring an ACL
- Configuring line rate
- Configuring the priority trust mode of a port
  - Priority mapping overview
  - Configuring priority mapping
    - Approach 1
    - Approach 2
- Configuring a QoS policy
- ACL and QoS configuration example
- Configuration guidelines
Configuring wireless QoS
- Overview
  - Terminology
    - WMM
    - EDCA
    - AC
    - CAC
    - U-APSD
    - SVP
  - WMM protocol overview
- Enabling wireless QoS
- Setting the SVP service
- Setting CAC admission policy
- Setting radio EDCA parameters for APs
- Setting client EDCA parameters for wireless clients
- Displaying the radio statistics
- Displaying the client statistics
- Setting rate limiting
  - Setting wireless service-based client rate limiting
  - Setting radio-based client rate limiting
- Configuring the bandwidth guarantee function
- CAC service configuration example
- Wireless service-based static rate limiting configuration example
- Wireless service-based dynamic rate limiting configuration example
- Bandwidth guarantee configuration example
Advanced settings
- Advanced settings overview
- Configuring WLAN advanced settings
- Advanced settings configuration examples
Configuring stateful failover
- Overview
  - Introduction to stateful failover
  - Introduction to stateful failover states
- Configuring stateful failover
- Stateful failover configuration example
- Configuration guidelines
Index