H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 308)

292
Configuring the RADIUS server (IMC v5)
NOTE:
The following takes the IMC (IMC PLAT 5.0 and IMC UAM 5.0) as an example to illustrate the basic
configuration of the RADIUS server.
1. Add an access device.
a. Click the Service tab in the IMC platform.
b. Select User Access Manager > Access Device Management from the navigation tree.
c. Click Add.
d. On the page that appears, enter 12345678 as the Shared Key, keep the default values for
other parameters, and select or manually add the access device with the IP address 10.18.1.1,
and click Apply.
Figure 307 Adding access device
2. Add a service.
a. Click the Service tab.
b. Select User Access Manager > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to dot1x, and set the Certificate Type to
EAP-PEAP AuthN and the Certificate Sub Type to MS-CHAPV2 AuthN, and click Apply.