Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 615

Text mode
Original mode

599

Figure 636 Network diagram

Configuration procedure

Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "Configuring access services."

Configure load balancing:

Select Advanced > Load Balance from the navigation tree.

On the Load Balance tab, select Traffic from the Loadbalance Mode list, enter the threshold 10

and the gap 40.

Use the default values for Max Denial Count and RSSI Threshold.

Click Apply.

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module