H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 180)

164
Table 66 Field description
Field Description
Destination IP Address
Destination IP address and subnet mask of the IPv4 route.
Mask
Protocol Protocol that discovered the IPv4 route.
Preference
Preference value for the IPv4 route.
The smaller the number, the higher the preference.
Next Hop Next hop IP address of the IPv4 route.
Interface
Outgoing interface of the IPv4 route. Packets destined for the specified
network segment will be sent out the interface.
Creating an IPv4 static route
1. Select Network > IPv4 Routing from the navigation tree.
2. Click the Create tab to enter the IPv4 static route configuration page, as shown in Figure 146 .
Figure 146 Creating an IPv4 static route
3. Specify relevant information as described in Table 67 .
4. Click Apply.
Table 67 Configuration items
Item Description
Destination IP Address
Enter the destination host or network IP address, in dotted decimal
notation.