Keri Systems Doors.NET Manual - Manual (Page 96)

Doors.NET Reference Manual
- 96 -
Multiple User Clients
Multiple user clients allows for multiple concurrent users to administer and monitor sites
within the Doors.Net software. One client connection is included
with the standard version of the software and additional client connections can be pur-
chased from Keri Systems inside sales. Once additional clients have
been enabled on your license, you need to open the License Manager from the host PC
and click on Activate. The PC will connect to the Licensing Server
over the Internet and once re-activation is successful you will be prompted to restart the
Application Server Windows service.
The installation disk will allow you to install the standard client GUI on as many work-
stations as you desire. When each client workstation connects to
the Application Server, they utilize one of the client connection which are enabled on the
license.
Note: If you are installing clients on other networked machines you MUST set the Applic-
ation Server to a static IP address.
Client-Only PC System Requirements
l
Microprocessor - Intel Pentium, Dual-Core, 2.4 GHz or greater, 2 MB cache or
greater
l
Memory - 2 GB or greater
l
Operating System Compatibility:
- Windows 7 Professional/Enterprise/Ultimate, x32/x64
- Vista Business/Enterprise/Ultimate - Service Pack 1, x32/x64
- XP Professional - Service Pack 3, x32/x64
- Windows Server 2003/2003 R2/2008/2008 R2
l
Hard Drive - 160 GB or greater
l
Video - either on-board or plug-in card that supports a minimum resolution of
1280x1024
or greater
- Video - either on-board or plug-in card that supports a minimum resolution of
1280x1024
or greater
Communication Ports
The first client connection uses communication port number 11000 to connect to the
Application Server, the second uses 11001