Exempt a cardholder from apb rules – Keri Systems Doors.NET Manual User Manual
Page 382

Doors.NET Reference Manual
- 382 -
7. If you present a card which has access to both of these readers you will not be able
to get access to the same reader twice. A second card presentation will generate
the following access denied message:
8. If the door contacts are enabled on the controller then the contacts need to open,
then close, following a valid card presentation for APB to be set. If the contacts do
not open then you will receive an AccessGranted - No Entry event (meaning you
will be able to present the card again at that reader and gain access).
Exempt a Cardholder from APB Rules
It is also possible to set a cardholder to be exempt from APB, meaning the APB rules will
not apply to them.
1. To set this, click on the Advanced tab of a cardholder record and put a check mark
where it states: 'Exempt from APB' then click the Save/Save All icon.