Keri Systems Doors.NET Manual - Manual (Page 22)

Doors.NET Reference Manual
- 22 -
including varying restriction levels of lock and unlock and the ability to assign/un-
assign specific doors. The Situation Manager requires the master controller always
be online with the host PC.
Unique to Keri NXT Mercury Powered Controllers and Mercury Hardware:
l
None at this time.
Unique to ASSA Lock Hardware:
l
None at this time.
Program Improvements
For All Hardware Platforms:
l
Corrected an issue where the Archive database could not connect when using Win-
dows 8. Windows 8 uses SQL Server 2012 which has a slightly different structure
for its connection information. The program now recognizes when SQL Server
2012 is active and adjusts its connection information accordingly.
l
Corrected an issue where both a door strike and a door forced alarm could be
assigned to the same control point (when reassigning a door strike from its default
control point) resulting in unexpected operation. The program now prevents the
control point from being assigned to door forced if already assigned to door strike.
l
Corrected an issue that, in certain applications, would not allow a temporary
unlock command to be overridden by a lock command.
l
Restricted access to Design Mode to operators designated as System Admin-
istrators. You must also be in Advanced View to access Design Mode. Design
Mode allows an operator to change the appearance and layout of program
screens.
l
If a gateway disconnects from the host PC, the status grid will set all controllers on
that gateway to offline status.
l
Added a "Remove All" option to Local Linkage triggers and procedures. You must
be a System Administrator to perform a Remove All and you must remove triggers
before you remove procedures.
l
If a reader is an exit reader or does not have Door Contact enabled the Door Status
grid would not display status in the Door Forced or Door Held fields.
l
A "Client Only" installation was unnecessarily installing the Gateway Wizard. If no
gateway is being installed, the program now does not install the Gateway Wizard.
Unique to NXT Controllers:
l
None at this time.