Keri Systems Doors.NET Manual User Manual
Page 501
Doors.NET Reference Manual
- 501 -
4. From the Macro Item type drop-down list select Reader Mode Control.
5. Select the appropriate hardware gateway.
6. Select the relevant controller.
7. Select the 1st reader to be used.
8. Set the Reader Mode to Unlock.
9. Highlight the macro, click Add Action Item again, then repeat this same process for
every reader on the system that needs to be part of the global unlock configuration.
You will then have a Macro with multiple action types listed beneath - each one
will be setup to unlock each of the doors.
Keep in mind, as it is global linkage the doors can be located on completely dif-
ferent controllers, even different hardware gateways.