Keri Systems Doors.NET Manual - Manual (Page 318)

Doors.NET Reference Manual
- 318 -
Hardware Setup
The Hardware Setup options provide access to hardware configuration, hardware main-
tenance, and manual hardware operation tasks for Doors, Inputs, Outputs, Panels, and
All devices. Depending upon the selected hardware item and task to perform, supporting
Selected Hardware and Hardware Browser tabs will appear.
Click on the icon to display the Hardware Setup tab set.
l
Setup Doors - opens the Doors grid and adds the Selected Hardware ribbon tab
that allows you to configure reader operating parameters, view event history, audit
changes, view current status, manually lock/unlock, configure reader type (as
applicable), and mask/unmask certain door event types.
o Setup NXT Exit Reader - doors on Mercury Powered NXT controllers
can accept Exit Readers.
l
Setup Inputs - opens the Inputs grid and adds the Selected Hardware ribbon tab
that allows you to view event history, audit changes, view current status, and
mask/unmask monitor points.
l
Setup Outputs - opens the Outputs grid and adds the Selected Hardware ribbon
tab that allows you to view event history, audit changes, view current status, and
mask/unmask monitor points.
l
Setup Panels - opens the Panels grid and adds the Hardware Browser ribbon tab
that allows you to remove a controller or an attached peripheral from the system,
upgrade firmware on a panel and/or it's attached peripherals, and update the net-
work with new configuration information.
l
Setup Cameras - opens the Cameras grid and adds the Hardware Browser ribbon
tab that allows you to add/remove a camera from the system and configure cam-
eras.