Keri Systems Doors.NET Manual - Manual (Page 360)

Doors.NET Reference Manual
- 360 -
Camera Operating Parameters
Camera Identification
l
Name - enter a user-friendly name given to the camera, typically to make it easy to
identify in an event message or report.
l
Description - enter a physical description of the camera.
Classification
l
Scope - identify if the camera is an indoor or outdoor device.
l
Priority - set the order of precedence (level of priority) for video call up on alarm,
the range is from 1 (highest) to 99 (lowest).
l
Timezone - set the timezone in which the camera is located.
l
Category - a user-definable field for further camera identification/description.
l
Location - enter a description of the physical location of the camera.
Recording Behavior
l
Pre-Alarm Buffer - set the number of seconds of pre event video that should be
saved when an event-triggered video is recorded. The range is from 0 to 60
seconds. The default is 10 seconds.