Keri Systems Doors.NET Manual - Manual (Page 316)

Doors.NET Reference Manual
- 316 -
Scan - Honor Day of Week
When using the Scan - Honor Day of Week setting then the Schedule will always oper-
ate on the days defined regardless of any holidays that might be active. It can be thought
of as a setting that overrides holidays.
Say, for example, that you want a time schedule to always be active Mon-Fri regardless
of any holidays that have been defined, but you don't want the schedule to be active on
other days of the week (even if they are on holidays), this mode will accomplish that.
Note:
1. All intervals within the schedule will have this setting applied.
2. If you have two intervals that have overlapping times for the same day this will be
treated as a single interval. For example, if you have interval 1 operating from
08:00-12:00 on Monday and then interval 2 from 10:00-17:00 on Monday as well,
then this will be treated as an interval operating from 08:00 - 17:00.