Keri Systems Doors.NET Manual - Manual (Page 547)

Doors.NET Reference Manual
- 547 -
3. Highlight the new procedure and enter a description.
l
The Description text field allows you to change the name of the procedure from
the default name and can accept any character up to a maximum of 50 characters.
l
The New Procedure button adds a new procedure to the tree view and auto-
matically selects the item. Use the add Action button to add action items to the pro-
cedure.
l
The Add Action button adds a new procedure action to the tree view under the
selected procedure and automatically selects the item. Use the action type selec-
tions to change the type of action. This button is only enabled when a procedure is
selected.
4. With the procedure highlighted click Add Action.
5. Click on the Action, then from the Action Item Type drop down list, select 'Control
Point Control'.