Keri Systems Doors.NET Manual - Manual (Page 335)

Doors.NET Reference Manual
- 335 -
Setup Panels
The Setup Panels process allows you to configure controllers and setup their com-
munication parameters, as well as configure peripheral panels connected to the con-
trollers.
Under the Hardware Setup tab, Click the Panels tab. The Hardware Browser tab is then
loaded on the
ribbon , and if a controller or panel is selected, the Selected Hardware tab
is also added.
Display Panel and Controller Information by Column
The left pane of the grid lists all recognized panels and controllers in alphabetical order,
prioritized by column. Drag column headers above the header field to filter and display
information per your specific needs and priorities. Select a panel or controller listed in
the left pane and all its configuration parameters are displayed in the right pane.
Information displayed in sortable columns (based on panel or controller type):
l
Device Type - all panels recognized by the system listed by controller followed by
its peripheral panels
l
Gateway - the gateway type/name to which the panel is connected
l
Controller - the name assigned to the controller
l
Description - the name assigned to that panel (the controller or its peripheral pan-
els)
l
Communication - the panel's current online/offline status
l
Serial Number - the panel's serial number, if one has been entered