Keri Systems Doors.NET Manual - Manual (Page 408)

Doors.NET Reference Manual
- 408 -
and will create an 'alert' - which can then be configured (using device types) for an
operator to take action on.
6. The last tab in filter setup is the Video tab. This is for event video recording, when
a camera is assigned to a hardware object, such as a reader.
7. Events are selected and when those events occur (such as a door forced events
happens at a certain reader). You can chose to either create a short video clip (10-
60 seconds) or have a live video window popup on screen.
8. To assign the filter to a reader, locate and highlight a reader in the hardware tree.
In properties scroll down to Monitoring, then select the new filter from the 'Use This
Filter' drop-down list.
9. When this filter is assigned to a reader only the messages specified will display in
Live Events.
10. The messages selected for acknowledgment will appear in the alerts grid once you
have set 'Require Acknowlegement' to Yes. It may seem like you are making the
same setting twice, but this is because multiple readers may be using the same fil-
ter and the allows certain readers to have acknowledgment disabled without affect-
ing other readers.