Keri Systems Doors.NET Manual - Manual (Page 542)

Doors.NET Reference Manual
- 542 -
- Airlock is Busy
Control Point Change of State Disabled From Host
Off-Line: No Report
Output is Inactive
Output is Active
Controller Dia-
gnostics
System Controller Power-Up
Controller
Local Inputs
Change of State Tamper Became Active
Tamper Became Inactive
Power Monitor Became Active
Power Monitor Became Inact-
ive
Controller to
Host Driver
System Host Off-Line
Host On-Line
Transaction Count Over Pre-
set Limit
Configuration Saved to Flash
Memory
Credentials Saved to Flash
Memory
Credentials Cleared - SRAM
Buffer OverFlow
Monitor Point Change of State Disabled From Host
Offline: No Report
Secure: Input is Inactive
Alarm: Input is Active
Fault
Exit Delay in Progress
Entry Delay in Progress
Inactive (Was Active)
Active (Was Inactive)
Inactive (Was Alarm)
Inactive (Was Fault)
Inactive (Was Alarm or Fault)
Panel Cabinet
Tamper
Change of State Tamper Became Active