Keri Systems Doors.NET Manual - Manual (Page 74)

Doors.NET Reference Manual
- 74 -
Legacy controllers are carrying over from an existing Doors32 installation that is being
upgraded to Doors.NET. There is a per-controller fee for licensing Legacy controllers.
Legacy PXL controllers must be at firmware v8.4.49 or greater. This firmware revision is
the earliest to implement the current U.S. Daylight Standard Time dates and has the
PXL’s complete anti-passback implementation. A CU500 firmware upgrade is available
for all PXL controllers to bring them up to the current firmware revision.
Mercury Powered NXT License Key
A Mercury Powered NXT license key must be obtained from Keri Inside Sales. The Mer-
cury Powered NXT license is limited to a licensed number of controllers. Before con-
tacting Keri Inside Sales for a license key, you need to know the number of Mercury
Powered NXT controllers you are licensing.
In some cases an appropriately configured license key may be provided with the
invoicing paperwork in a shipment.
Demo Mode
Doors.NET has a demo mode feature that allows you 30 days of limited, basic operation.
This can give you an opportunity to try the software before obtaining a license. However,
demo mode only supports NXT controllers; it does not support PXL or Mercury Powered
NXT controllers.
Offline Registration
Offline Registration is used when you already have an existing licensed system but want
to add additional features or enhancements.
Place a checkmark in the selection box then e-mail the license file as detailed in the
'Activation Via Email' section below.
License Manager
The License Manager registers your Doors.NET software and activates any applicable
features or controller values, allowing system use. Please have your license key ready
before beginning this section.
Run the License Manager Program
1. In the Keri > DoorsNET folder, locate and run the LicenseManager.exe program.
2. The License Manager window appears.