Keri Systems Doors.NET Manual - Manual (Page 28)

Doors.NET Reference Manual
- 28 -
l
An Elevator Override Schedule feature has been added allowing the enabling of
floor access via a schedule. This feature is accessible when the Advanced View is
enabled.
l
An "Honor Day of the Week" option has been added to schedule intervals. This is
used if you need specific schedule intervals to be activated regardless of if the day
is a holiday (when all intervals would have been disabled).
l
Added Door Forced and Door Held alarm options to the Door property grid.
Unique to Mercury Hardware:
l
An Elevator Override Schedule feature has been added allowing the enabling of
floor access via a schedule. This feature is accessible when the Advanced View is
enabled.
l
An "Honor Day of the Week" option has been added to schedule intervals. This is
used if you need specific schedule intervals to be activated regardless of if the day
is a holiday (when all intervals would have been disabled).
Program Improvements
For All Hardware Platforms:
l
Corrected the ability to use hardware control to turn system calendar schedules or
global linkages on/off.
l
PIN Exempt was not displayed as a selectable option for the distribution Door-
s.NET interface. It has been added to the pull-down menu.
l
Corrected several grid update issues that required exiting, then re-entering a grid
to properly refresh grid values.
l
Enabled the ability to save a new system layout without having to permanently set
the save new layout tick-box. This accommodates systems where an administrator
will set and save a new layout and then reboot the system for a standard user for
everyday use.
l
Corrected a Holiday grid issue when setting an extended holiday date range. If you
used the click-and-drag method for setting the date range, it would be set correctly.
If you used the click-and-shift-click method, the program would not accept the end-
ing date.
l
Added a buffer codec option for video cameras allowing greater flexibility in cam-
era configuration for video clips and snapshots.
l
Corrected a time value entry issue in certain fields. If the PC/system clock was set
for 24-hour display (versus 12-hour AM/PM) display, certain fields were only
accepting 12-hour AM/PM format entries.
l
Added the ability to allow video recording per a schedule. With no schedule set,
the video camera operates all the time. If a video camera is assigned a schedule, it
will only record during the schedule time period.