beautypg.com

System administrator only, Enable global macro, Enable system calendar – Keri Systems Doors.NET Manual User Manual

Page 456: Require notes and set notes length, Require and set password, Global configuration options

background image

Doors.NET Reference Manual

- 456 -

System Administrator Only

Limits access to the Situation Manager to operators who have System Administrator
level logins. The default is to not require a System Administrator login to activate the
Situation Manager.

1. To require a System Administrator login, click in the System Administrator Only

field in the grid and select Yes from the pull-down menu.

Enable Global Macro

This setting can be used only if the optional Global Linkage Service is installed and
enabled on your license key. The setting allows a Global Linkage Macro to change the
Situation Manager Global Unlock/Lock states.

Enable System Calendar

If the System Calendar is enabled on your license, this setting allows you to use the Sys-
tem Calendar to change the Situation Manager Global Unlock/Lock states. This option
will only display if System Calendar is enabled on your license.

Require Notes and Set Notes Length

Allows you to require a note of explanation when an operator activates a Global Lock or
Unlock via the Situation Manager. You can then set the minimum number of characters
the note must have. The default is to not require a note.

1. To require a note of explanation on activation of a Global Lock or Unlock, click in

the Require Notes field in the grid and select Yes from the pull-down menu.

2. Then click in the Notes Length field and set the minimum number of characters for

the note. You can either directly enter the number of characters or use the dis-
played slider to set the length. The maximum is 128 characters.

Require and Set Password

Allows you to require a password to activate the Situation Manager and set the pass-
word to be entered. The default is to not require a password.

1. To require a password, click in the Require Password field in the grid and select

Yes from the pull-down menu.

2. Then click in the Password field and enter the desired password. Your characters

are displayed as you type so you can verify your entry prior to saving.

Global Configuration Options

The Global Configuration grid allows you to configure how the Global Lock/Unlock rules
are applied. Refer to the following figure for all Global Configuration options.