Keri Systems Doors.NET Manual - Manual (Page 560)

Doors.NET Reference Manual
- 560 -
3. Click Add Trigger button again, as the process now needs to be repeated for when
the input is secure. Create a name for this trigger (Input - Secure).
l
Execute this Procedure - Select the Card Or Pin Procedure
Procedure Command - Should be left at the default of: Execute (Prefix A Actions)
Source Type - Select Monitor Point (The available monitor point transactions will
appear on the right)
Source - Select the specific input that will be used
Active During This Schedule - Select Always for the linkage example to always
be actionable.
Trigger Variable Logic - Should be left at the default
Transactions - On the transactions list place a tick against the transaction:
Secure: Input is Inactive
4. Your second trigger settings should then display as follows: