Keri Systems Doors.NET Manual - Manual (Page 242)

Doors.NET Reference Manual
- 242 -
2. Click the Add icon in the Holidays icon group and a default new holiday will be
added.
3. Highlight the new holiday, you can then change the default name and set it to be
enabled.
4. Click on a desired holiday date from the calendar. You can drag the curser or use
the Shift keyboard key to select a range of consecutive dates- you will be asked to
verify the selected date(s).
5. Select the Holiday Type (1 to 8) from the drop-down list.
6. Place a check mark in ‘Show All Holiday Dates’ to display all existing holiday
dates in bold on the calendar.
Access Groups
Access Groups are combinations of readers and time schedules. They are assigned to
cardholders to define where and when they are allowed to gain access.
NOTE: Doors.NET has a pre-defined Total Access group. This is a static access group
in that once Readers and Time Schedules are added to this group, they cannot be
removed. Use this Access Group carefully.
1. From the Home tab click on Access Groups.