Keri Systems Doors.NET Manual - Manual (Page 420)

Doors.NET Reference Manual
- 420 -
10. Go to the Messages tab then locate the exact event that you wish to use.
11. Next step, go to the Acknowledge tab - all the previously selected events will be lis-
ted. Place a checkmark against the event you wish to use for the sound alert.
12. Locate and highlight the reader in the hardware tree - Setup >> Hardware Setup >>
All.
13. In the reader properties, scroll down to the Monitoring section. Assign the device
type, assign the filter, then set Require Acknowledgment and Sound Alerts both to
Yes. Then save.