Keri Systems Doors.NET Manual - Manual (Page 25)

Doors.NET Reference Manual
- 25 -
Firmware Requirements
For NXT controllers and peripherals:
l
Standard NXT controllers require new firmware revision 2.05.27.
l
NXT Readers require firmware revision 3.00.01 or greater.
l
Reader Interface Modules (RIMs) require firmware revision 3.02.05.
l
4x4 I/O Modules require firmware revision 3.00.02.
For PXL:
l
PXL controllers require new firmware revision 8.6.09.
l
Legacy PXL controllers should be at firmware revision 8.4.49 or greater (this min-
imum firmware revision is programmed with the current U.S. Daylight Savings
Time dates and has the complete PXL implementation of Anti-Passback).
For Mercury Powered NXT controllers and Mercury Hardware:
l
Mercury Powered NXT controllers require new firmware revision 1.179.
Firmware Upgrades
NXT Firmware v2.05.27
l
A number of communication improvements have been made with NXT readers to
ensure proper communication with older reader firmware revisions as well as cur-
rent releases.
PXL Firmware v8.06.09
l
Improves the functionality of the Global Unlock/Lock feature for PXL controllers.
Mercury Hardware Firmware v1.179
l
Corrected an issue with properly restoring an NXT reader's LED state following a
power cycle.
l
Added new message types to increase the reporting ability of certain hardware
events.
l
Improved communication connectivity with 4x4 units to minimize unit dis-
connections.
l
Updated the collection of data from the 4x4 status command to include more inform-
ation.
Translations
Completed Translations:
l
Chinese (Simplified)
l
Chinese (Traditional/Taiwan)
l
English (UK)