Keri Systems Doors.NET Manual - Manual (Page 332)

Doors.NET Reference Manual
- 332 -
Setup Outputs
The Setup Outputs process allows you to configure the output type and monitoring para-
meters.
Under the Hardware Setup tab, Click the Outputs tab. The Selected Hardware tab is
then loaded on the
ribbon .
Display Output Information by Column
The left pane of the grid lists all recognized Outputs in alphabetical order, prioritized by
column. Drag column headers above the header field to filter and display information per
your specific needs and priorities. Select a output listed in the left pane and all its con-
figuration parameters are displayed in the right pane.
Information displayed in sortable columns:
l
Gateway - the gateway type/name for the controller to which the output is con-
nected
l
Controller - the name assigned to the controller