Keri Systems Doors.NET Manual - Manual (Page 454)

Doors.NET Reference Manual
- 454 -
Configure the Situation Manager
Situation Manager configuration allows you to define how Global Lock/Unlock is applied
to the system. You must be logged in at a system administrator level to configure Situ-
ation Manager options.
NOTE: Situation Manager configuration options become read-only if the system is in an
active Global Lock or Global Unlock state. This prevents a configuration change from
being made that may affect or confuse the current Global Lock/Unlock state. This read-
only state does not apply to other properties or configuration options for other features
within the program.
Enable Advanced View
The Situation Manager and the Global Lock/Unlock data fields are a part of Doors.NET’s
Advanced View feature set, so you must enable Advanced View to access and configure
this feature.
1. Click the View tab > Advanced View ribbon icon.
2. A Password window appears.
3. Enter “Keri10” – the default password.
4. Click OK. The Advanced View feature set is now enabled.
Enable Situation Manager
1. Click the Setup tab > System Options ribbon icon to open the System Options win-
dow.