Keri Systems Doors.NET Manual - Manual (Page 34)

Doors.NET Reference Manual
- 34 -
l
Corrected a date-check issue with appointment schedules that would not allow an
appointment schedule to cross midnight.
l
Added the ability to show/hide Alerts in the operator permissions grid.
l
Modified the License Manager to allow Demo mode to activate regardless of the
availability of an Internet connection.
l
Changed the Block Enrollment default for credential access from "Total Access" to
"Unassigned."
Unique to NXT Controllers:
l
None at this time.
Unique to PXL Controllers:
l
Corrected the message displayed if a PIN is not entered when in dual verification
mode from "No Second Card" to "No PIN Entered."
Unique to Keri NXT Mercury Powered Controllers (MSC):
l
Added a pop-up window to confirm the configuration of Exit Readers.
Unique to Mercury Hardware:
l
Corrected an issue where the Update Network icon was not made available to Mer-
cury hardware.
l
Corrected a hardware configuration grid refresh issue where the grid would con-
tinue to show a Network Update was required following resetting an AP controller.
Known Issues
l
None at this time.
Firmware Requirements
For NXT controllers and peripherals:
l
Standard NXT controllers require current firmware revision 2.05.23.
l
NXT controllers with Mercury Inside firmware require current revision 1.01.40.
l
NXT Readers require current firmware revision 3.01.01.
l
Reader Interface Modules (RIMs) require current firmware revision 3.02.05.
l
4x4 I/O Modules require current firmware revision 3.00.02.
For PXL:
l
PXL controllers require current firmware revision 8.6.04