Keri Systems Doors.NET Manual - Manual (Page 483)

Doors.NET Reference Manual
- 483 -
Email/SMS Automation
Email/SMS Automation allows an operator to create a macro that will automatically send
a message via email or SMS whenever a specific trigger occurs. The instructions below
are based on a specific example of creating an Email/SMS message that is sent
whenever a Door Forced Alarm is generated at a specific door.
Advanced View must be enabled for this option to appear on the Ribbon Bar.
There are five steps to Automating Email/SMS messages.
1. Create the Macro
2. Create the Trigger
3. Configure the Linkage Service
4. Verify the Macro is Operational
5. Link the Hardware to the Macro
Click the Email/SMS ribbon icon to open the Global Linkage window.
Create the Macro
The Macro is the action to be performed when a trigger condition is met.
1. Click the Macro Tab. Click the Add New button to create a Macro entry.
2. Click on the New Macro entry to enable Macro Properties.
3. Enter a descriptive name into the Description field. This name is copied into the cor-
responding menu-tree field as it is entered in the Properties field.