Keri Systems Doors.NET Manual - Manual (Page 531)

Doors.NET Reference Manual
- 531 -
2. Highlight the new procedure, change the default name, then click the Add Action
button. There are many Action Types that can be selected. Refer to the Local Link-
age
Procedure Action Types for a table that lists all the available procedure action
items that can be selected.
3. Highlight the Action Type entry that appears beneath the procedure description
and you will see an 'Action Item Type' pull-down list on the right. From this list
select the appropriate action for your procedure. For example, if you want to activ-
ate a certain output select 'Control Point Control', followed by the specific output
you wish to activate, then set it to On. Click Save.