Keri Systems Doors.NET Manual - Manual (Page 259)

Doors.NET Reference Manual
- 259 -
4. If a firmware upgrade is needed, the required revision is listed in the Status Mes-
sages grid. Close the AutoConfiguration tab and highlight the controller needing
an upgrade in the hardware tree.
5. Click on the Firmware Upgrade icon on the toolbar ribbon.
6. Windows Explorer opens the folder with the new firmware revision. Select the cor-
rect .CRC file and click Open.
7. A notification window appears stating the controller will go offline momentarily.
Click OK and the firmware is updated.
8. A Live Event appears when the upgrade is complete.
Your system is now ready for operation.