Override commands – Keri Systems Doors.NET Manual User Manual
Page 445
Doors.NET Reference Manual
- 445 -
Override Commands
As an example, you may also want to restrict how much control operators have over the
hardware in the system.
For example, if you do not want the software users to be able to reset, connect, or dis-
connect controllers or then ensure these settings are not ticked.
1. Scroll through the list and select/deselect the options per the desired level of con-
trol.
2. If the user then right-clicks a controller in the hardware tree the Connect, Dis-
connect, and Reset options are grayed-out.