Keri Systems Doors.NET Manual - Manual (Page 548)

Doors.NET Reference Manual
- 548 -
6. Control Points are outputs and for this example it is using an output on a 4x4 mod-
ule - wired into an NXT Mercury Powered 4-Door controller. The 4x4 module
provides 4 general purpose inputs and 4 general purpose outputs - The first of
these outputs has been named Buzzer - this is the output that will be used. Simply
select the output from the list and set it to 'On'.
7. Before defining how to trigger the procedure you also need to configure a normal
state for the output to return to (when the input trigger becomes inactive). Add a
second Procedure, add an Action again and then select the same output, but this
time set it to 'Off'.