Keri Systems Doors.NET Manual - Manual (Page 251)

Doors.NET Reference Manual
- 251 -
Perform an Auto Configuration
To detect the slave PXL controllers on the network you must perform an auto-con-
figuration. Auto-config is used to automatically retrieve the controller/door information
from the PXL network and then populate the relevant Doors.NET SQL database tables
with the pertinent hardware details.
1. To perform the auto-config, highlight the master controller in the hardware tree.
2. Click the Auto-Config button.
3. In the Status Message grid you should start to see regular transactions stating:
“PXL Master is searching for slave controllers.” It should take no longer than 2 or 3
minutes for the master controller to detect all the slaves on the network. The master
controller always looks for the maximum possible 127 slave controllers.
4. When auto-config has completed, the detected controllers appear in the Available
controllers grid, as shown below.