Keri Systems Doors.NET Manual - Manual (Page 21)

Doors.NET Reference Manual
- 21 -
Operating System 32-Bit 64-Bit
2003 Yes Yes
2008 Yes Yes
2008 R2 Yes Yes
2012 N/A Yes
(1) The ASSA gateway is not yet Windows 8 compatible for IP locks (Wifi and POE). The
software installer will not allow the ASSA gateway to be installed if the operating system
is Windows 8.
NOTE: Doors.Net software IS NOT compatible with any Home/Basic version of Win-
dows XP, Windows Vista, Windows 7, or Windows 8.
This is due to networking restrictions built into the Home/Basic versions of Windows
operating systems.
New Features
For All Hardware Platforms:
l
Added a linkage Export/Import function that allows a programmed linkage to be
exported from one controller and then imported by another on the same system or
on a completely different system. This feature is available via local linkage.
l
Added a Apply Template/Save Template for all controllers. This feature saves the
existing properties of a controller and its devices to a template file. That file can
then be applied to another controller of the same type. Available only in Design
mode.
Unique to Keri NXT Controllers:
l
None at this time.
Unique to Keri PXL Controllers:
l
Implemented the Global Unlock/Lock feature set in Doors.NET. When the cor-
responding input is activated, these features automatically either lock or unlock
ALL of the online and functioning doors in the PXL system; it does not allow selec-
ted doors to be excluded from the lock or unlock command. Since these features
are hardware controlled they are not dependent upon the PC to be activated. If con-
trollers are offline when a Unlock/Lock command is issued they will not respond to
the Unlock/Lock command until they come back online.
l
The Global Unlock/Lock functionality of PXL hardware can be extended using the
Situation Manager within Doors.NET software. This provides you with greater con-
trol and flexibility in how the Global Unlock/Lock features are implemented,