Keri Systems Doors16 - Manual (Page 88)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 88 Revision 2.1
2. Click on the tool bar button to ensure the card enrollment dialog box window is
active.
3. Click on the Enroll tab. In the enroll window, locate the Enroll Type field (see Figure
63).
Figure 63 – Enrolling by Card Number Range, Dialog Box Method
4. The enroll type field has two radio buttons: Enter Range and Read Cards. Click on the
Enter Range radio button. The resulting window should look similar to Figure 63.
5. Locate the Internal Number Range field. Click in the FROM field. Enter the card number
for the first card in the range of cards to be enrolled. The card number is the second set of
digits printed on the body of the card (the nnnnnnnn digits, see Figure 64). The card
number can be anywhere from 5 digits long to 8 digits long. For this example, the entire
number of the first card is K1757 187491; the card number is 187491. Type 187491.
Figure 64 – Proximity Card Number
NOTE: Block enrollment by number range is valid for "K" series Keri proximity cards
(identified by a leading K on the card’s external number etched on the body of the card). This
is a sample K-series external number: Kdddd nnnnnnn. It is the last set of digits that should
be entered as the external number. Block enrollment by number range is not yet available for
"W" series Wiegand cards.