Keri Systems Doors16 - Manual (Page 79)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 79
Figure 49 – Save Access Group
14. Click in the "Access Group Names" field and type a descriptive name for this access
group. For this example, type Building Access - Day. The window should look similar to
Figure 50.
Figure 50 – Assign the New Access Group Name
15. Click on the button. If the new access group is not saved before clicking any
other button or exiting the setup access group window, the data entered is lost and must
be re-entered.
16. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).