Keri Systems Doors16 User Manual
Page 172
Doors™ Users Guide
Keri Systems, Inc.
October 1998
01821-001
Page 172
Revision 2.1
Cycling Windows
Cycling windows automatically takes all open windows and arranges them in a cascading
fashion as explained above. And then, using the cycle windows icon, allows the operator to
quickly switch between all cascaded windows.
1.
To cycle between all open windows, click on the Window
⇒
Cycle pull-down menu
option or click on the
icon on the tool bar. The individual database windows will be
organized as shown in Figure 166 and each click on the
icon will switch to the next
open window.
Figure 166 – Cycling Database Windows
Retrieving the Software Revision and Logged Operator
At times it is necessary to verify the revision of the Doors software and to verify which
operator is logged on the program.
1.
To determine which version of Doors software is installed on the host computer and
which operator is logged into the Doors program, click on the Help ‰ About pull-down
menu. A window similar to Figure 167 will appear.
Figure 167 – Retrieving the Software Revision and Logged Operator
2.
Displayed in this window is the software revision (2.10 for this example) and the current
operator (Sys Supervisor).