Keri Systems Doors16 - Manual (Page 120)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 120 Revision 2.1
Figure 102 – Event Messages and Configuration Fields
3. Use the scroll bar at the right side of the window to scroll up and down the entire list of
event messages and locate the "Op Pulsed Door" message text string.
4. Click in the cell and type Temporary Door Unlock (see Figure 103).
Figure 103 – Edited Message Text String
5. Click on the button. If the message text change is not saved before clicking any
other button or exiting the setup monitor window, the data entered is lost and must be re-
entered.
6. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).