Keri Systems Doors16 - Manual (Page 135)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 135
System Operation
The system operation section explains how operators can manually and immediately perform
the following tasks.
• lock and unlock doors
• perform a complete database update
• monitor and collect events from controllers
• create event reports
• identify an unknown card
• disconnect from the access control network
• window management
• retrieving the software revision and logged operator name
Locking, Unlocking, and Updating Doors
The locking and unlocking door commands allow an operator to manually override
programmed door controls. The updating doors command allows an operator to rewrite
database information from the host computer to doors on the access control network.
1. To enter the operate door commands window, click on the Operate
⇒
Doors pull-down
menu option, or click on the icon on the tool bar. The Operate Doors window
appears (see Figure 116).
Figure 116 – Operate Doors Window
When working with the operate doors commands, the following buttons and fields apply to all
commands (see Figure 116).